Community College of Allegheny County Knowledge

English (US)
Log In
Home
Classroom & Other Spaces
Accounts Blackboard Classroom & Other Spaces Computers & Hardware Communications Enrollment & Student Services Freshservice Human Resources Security Software & Applications Student Areas and Services Student Types Websites & Mobile Apps Wireless & Wired Connections & Networking
Center for Education, Innovation & Training
Center for Education, Innovation & Training Event and Self-Service Spaces Instructional Technology (ITech) Classroom LiveSync Classrooms Non iTech Technology Classrooms Zoom Meeting Rooms
Print Hide

Table of Contents

Related Articles

Keywords

Power

Turning On a Classroom/Desktop Computer

  1. On the back of the computer monitor, you will find the computer
  1. Press the button on the top of the computer; this is the power button
  1. The power button will turn white when powered on
 
 

Turning On a Classroom Computer Monitor

  1. On the back right of the computer monitor
  1. Press the button on the far right (left if you are standing behind the monitor)
  1. The power button will turn white when powered on 
 
 

Turning On the Equipment with the Touch Panel

Note

The computer and the monitor power on independently of the room system. Please see the instructions for powering on the computer and monitor for more information. 

 
  1. If the touch panel screen is black (sleeping), press the screen to wake
  2. Select Start
 
 

Turning Off the Equipment with the Touch Panel

Note

In addition to powering the system Off, you must log your profile out of the PC. The touch panel does not power the PC On or Off.

 
  1. Press the Power button on the touch panel
  1. Confirm that you would like to shut the system down by pressing Power Down
 
 
 
 

Video

Display the Instructor Computer Screen using the Touch Panel

  1. On the touch panel, select the PC source
  1. The instructor's computer screen will now be projected on the Clear Touch monitor
 
 

Show a Blu-ray/DVD using the Touch Panel

Note

The Blu-ray player is located inside the instructor's station cabinet, below the PC.

 
  1. Select the Blu-ray source on the touch panel
  1. Press the Eject button on the Blu-ray player
  1. Insert your Blu-ray/DVD into the tray
  1. Press the Eject button again to close the tray
  1. Use the navigation buttons on the touch panel to play your Blu-ray/DVD
 
 

Display a Personal Device using the Touch Panel

  1. Locate the Cable Cubby on the instructor's station
  1. Connect the HDMI cable to your laptop
    1. Connect the HDMI and the USB cables if you want to utilize the Clear Touch capabilities with your device
  1. On the touch panel, select the Laptop source
 
 

Using the Overhead Cam

  1. Select the Overhead Cam input
  1. Place your document or demonstration materials under the camera located in the ceiling
  1. Use the Camera controls to Zoom or Focus on the images
    • Laser On can be used to help find the center of the camera's image
 
 

Hiding/Display Mute using the Touch Panel

Note

The Mute Display button will allow you to make the Clear Touch monitor go black. This will hide any content from the class and can be used on any video source selected.

 
  1. Press Mute Displays
  1. Press Displays Muted to send content back to the Clear Touch monitor
 
 

Connecting a USB Drive

Info

USB ports are typically found on the PC behind the computer monitor or on the Interactive Touch display.

 

USB Port on Instructor PC

On the front of the instructor's computer, there is one USB port

 
 

On the Front of the Interactive Touch Display

On the front of the display on the right side, there are 2 USB ports

 
 
 
 
 
 

Audio

Volume Controls on the Touch Panel

  • To adjust the system volume in the room, use the AV Level Slider
  • To mute the room audio, press Mute Audio
  • To unmute the room audio, press Audio Muted
 
 

Classroom Phone

 

Internal Phone Calls Only

  • Your Classroom Number and Extension
  • Campus Security Button - Calls your Campus' Security
  • ServiceDesk Button - Calls the ITS ServiceDesk
  • Do Not Disturb Button - Mutes the phone ringer
 
 

Wireless/Desktop Mics

Note

You will have two wireless mic options. You can find a lapel mic and a hand-held wireless mic located in the charging station.  You can only use one wireless mic at a time. 

 

The AV Level controls the room sound coming from the speakers.

 

Wireless Microphone

Lapel Microphone

Info

These instructions detail the process of using the touch panel to mute/unmute the microphone. The system mutes the microphones by default. It's important to note that there is also a mute button on the microphone itself. 

 

You can toggle mute left for a quick pause. Toggle right to unmute.

 
  1. Remove the lapel mic from the charging base
  1. Press the side tabs on the left and right of the pack to open the cover
  1. Press the power button
  1. Close the cover
  2. Attach the mic and pack to yourself securely
  3. On the touch panel, select Audio Control
  1. The mic is muted by default; press Mute to Unmute
  1. Adjust the volume using the slider as necessary
  1. When finished, return the mic to the charger
 
 

Hand-held Microphone

Info

These instructions detail the process of using the touch panel to mute/unmute the microphone. The system mutes the microphones by default. It's important to note that there is also a mute button on the microphone itself. 

 

You can press MIC (no light) for a quick pause. Press again to unmute (turns red). 

 
  1. Remove the handheld mic from the charging base located inside the lectern cabinet
  1. On the bottom of the mic, press the power button
  1. On the touch panel, select Audio Control
  1. The mic is muted by default; press Mute to Unmute
  1. Adjust the volume using the slider as necessary
  1. When finished, return the mic to the charger
 
 
 
 

Desktop Microphone

Info

These instructions detail the process of using the touch panel to mute/unmute the microphone. The system mutes the microphones by default. It's important to note that there is also a mute button on the microphone itself. 

 

You can push to mute for a quick pause.

 
  1. Locate the desktop mic next to the instructor's PC
  1. On the touch panel, select Audio Control
  1. The mic is muted by default; press Mute to Unmute
  1. Adjust the volume using the slider as necessary