Before you begin

Connecting the cables to the Wall Inputs

  1. Locate the floor inputs in the middle of the gym, near the bleachers 
  2. Connect the Red and Green cables to the corresponding colors on the inputs 
  3. Connect the Orange and Blue cables to the corresponding colors on the inputs
  4. On the top of the lectern, open the Cable Cubby and pull out the HDMI Cable
  5. Connect the HDMI cable to the HDMI port on the laptop
  6. Connect the Ethernet cable to the Ethernet port on the laptop
  1. Choose Lectern Floor Box from the top of the screen inputs
  2. The projector will turn on and screen will begin to come down

Disconnecting the cables from the inputs

Before you begin

Make sure the system is turned off - Turning Off the Boyce Gymnasium A/V Equipment

  1. On each input there is a silver tab
  2. Press the tab
  3. While pressing the tab, pull the cable out from the input


Please wrap the cords the way you found them. Cables the for the lectern should be wrapped in a loop and hung up with the Velcro loop.
This will ensure the next person using the system will have a pleasant experience using the equipment.